I had to move it earlier today, but when I moved it back it doesn’t turn on! Could the bulb be burnt out? Please help I need it fixed ASAP! thanks for any help!
You can follow any responses to this entry through the RSS 2.0 feed.
You can skip to the end and leave a response. Pinging is currently not allowed.
2 Responses to “Why won’t my overhead projector turn on?”
If you moved the projector right after you turned it off you probably damaged the bulb. You should wait for about 10 to 15 minutes to let the bulb cool down before you move it. If the bulb, actually the filament, is still hot it will break easily when jostled.
me
December 1st, 2007 at 9:42 pm
most likely a bulb they go out easly
wires
December 3rd, 2007 at 4:27 am
If you moved the projector right after you turned it off you probably damaged the bulb. You should wait for about 10 to 15 minutes to let the bulb cool down before you move it. If the bulb, actually the filament, is still hot it will break easily when jostled.